HARLEY DAVIDSON DRAGRACING HISTORY
+4
RM
Iron89
King Rat
Admin
8 posters
NITROFRANKIE GO FAST HD'S :: HOT ROD HD PARTS :: WELCOME TO NITROFRANKIE GO FAST HD'S PARTS AND HISTORY
Page 3 of 5
Page 3 of 5 • 1, 2, 3, 4, 5
Re: HARLEY DAVIDSON DRAGRACING HISTORY
Last edited by Admin on Mon Feb 27, 2012 4:13 pm; edited 4 times in total
Re: HARLEY DAVIDSON DRAGRACING HISTORY
This was The Hausler Brothers Last bike built in the early 1990's
bike ran 8.58 at 158 with a 114 inch motor
Re: HARLEY DAVIDSON DRAGRACING HISTORY
Admin wrote:
Bob Mauriello
Who says Ironheads are not fast...
brooklyn- Posts : 2
Join date : 2011-11-18
gear change
we made a gear ratio change ,went deep . on the topend it needed to go one more it still didnot run out at the big end. when the motor was checked out that winter we found out it was down 13 horsepower with a 30% leakdown in the frontcylinder.so we missed our 9.second blast.Admin wrote:
johnny v..- Posts : 5
Join date : 2011-11-14
Age : 68
Location : stamford ct.
Vito Sabato's Modified 1983 CT Dragway
Worlds Quickest and Fastest Harley Modified at the time Vito ran a Best of 9.51 at 140 Vito also foot shifted this bike to an unheard of 9.87 at 136
one more time .
this april or may i am going to give it a shot of getting that 9. at 200 lbs. and 56 years old,i found some places that needed improvements in my motor this past couple of months. VP 109 IN THE TANK and the gear change that i am crunching the numbers as i am typing this post . also anybody else that wants to line up next to me in the other lane. for the facts not fiction. this will be the last blast on this bike ,then nitro prodrag. se ya at the track.Admin wrote:
johnny v..- Posts : 5
Join date : 2011-11-14
Age : 68
Location : stamford ct.
Re: HARLEY DAVIDSON DRAGRACING HISTORY
Check out Bob Spina with his feet on the pegs before the bike goes 2 feet
Page 3 of 5 • 1, 2, 3, 4, 5
NITROFRANKIE GO FAST HD'S :: HOT ROD HD PARTS :: WELCOME TO NITROFRANKIE GO FAST HD'S PARTS AND HISTORY
Page 3 of 5
Permissions in this forum:
You cannot reply to topics in this forum
|
|