1960s Doc Dytch Little Stroker
2 posters
NITROFRANKIE GO FAST HD'S :: HOT ROD HD PARTS :: WELCOME TO NITROFRANKIE GO FAST HD'S PARTS AND HISTORY
Page 1 of 1
1960s Doc Dytch Little Stroker
Nostalgia Stuff:
Located this Little 60s Gem in PA, the Owner Came upon some Sportster parts but only wanted the Frame, he had no idea what this was..
4 5/8" x 3 3/16" Dytch Cylinders, S&S Small Dia Wheels, Sifton minus minus cams, lightened idler gear, 67 oil pump, reinforced trans boss, missing trans and cam cover, matching case motor with a Title... a future little Hot Rod project after my 66 CH project is complete..
1966 XLCH Motor below build by Don Rothwell, It Will Be Done !
Located this Little 60s Gem in PA, the Owner Came upon some Sportster parts but only wanted the Frame, he had no idea what this was..
4 5/8" x 3 3/16" Dytch Cylinders, S&S Small Dia Wheels, Sifton minus minus cams, lightened idler gear, 67 oil pump, reinforced trans boss, missing trans and cam cover, matching case motor with a Title... a future little Hot Rod project after my 66 CH project is complete..
1966 XLCH Motor below build by Don Rothwell, It Will Be Done !
S.Monte- Posts : 22
Join date : 2012-07-19
Location : North Jersey
Re: 1960s Doc Dytch Little Stroker
Looks like a great find Steve. I Fired up Nitro Frankies bike pictured on this website yesterday. With a little finessing it will be ready for a test run on October 28th at Atco. Frankie has DJ "Nitrowizard" coming to tune the beast. I am very pleased with the initial start up and have confidence in the combination. I am working on getting my nitro engine together for this also. It will be tight as I have a pretty full month of other activities to take care of.
sterlinghp- Posts : 7
Join date : 2011-11-28
Age : 65
Location : Lyme CT
Mark's Fuel Bike
Mark,
If I do not have to work that day, I will ride down... Best of Luck, I know that you have been working your tail off to get the machine on the money...
If I do not have to work that day, I will ride down... Best of Luck, I know that you have been working your tail off to get the machine on the money...
S.Monte- Posts : 22
Join date : 2012-07-19
Location : North Jersey
Re: 1960s Doc Dytch Little Stroker
Thanks Steve,
Both Frank and I stated yesterday that we would keep you informed on this date so you could be there. Hope you can make it. If you are on facebook and look at my profile you will see 3 videos from New England Dragway two sundays ago. I broke something in the trans on the third run. When I was decellerating with the engine off and clutch in I could hear a faint click noise the decreased in frequency as the speed of the bike decreased. Despite that it was a lot of fun. she ran a 10:36 @ 132 mph and was still lean. I am going to try to find a standard ratio clutch gear set for this 67-70 box. I have C-ratio gears in it. The bike is just straining to pull my weight out of the hole. Bike and I weigh 680 approximately. If I plug a 175 lb rider into the formula which is 100 lbs les han me, she runs 9.60s with the 123 hp she has to the back tire.
Both Frank and I stated yesterday that we would keep you informed on this date so you could be there. Hope you can make it. If you are on facebook and look at my profile you will see 3 videos from New England Dragway two sundays ago. I broke something in the trans on the third run. When I was decellerating with the engine off and clutch in I could hear a faint click noise the decreased in frequency as the speed of the bike decreased. Despite that it was a lot of fun. she ran a 10:36 @ 132 mph and was still lean. I am going to try to find a standard ratio clutch gear set for this 67-70 box. I have C-ratio gears in it. The bike is just straining to pull my weight out of the hole. Bike and I weigh 680 approximately. If I plug a 175 lb rider into the formula which is 100 lbs les han me, she runs 9.60s with the 123 hp she has to the back tire.
sterlinghp- Posts : 7
Join date : 2011-11-28
Age : 65
Location : Lyme CT
Similar topics
» Doc Dytch Strokers
» HARLEY DAVIDSON DRAGRACING HISTORY
» Little 75 Inch Family Affair XLCH Sportster
» HARLEY DAVIDSON DRAGRACING HISTORY
» Little 75 Inch Family Affair XLCH Sportster
NITROFRANKIE GO FAST HD'S :: HOT ROD HD PARTS :: WELCOME TO NITROFRANKIE GO FAST HD'S PARTS AND HISTORY
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|